Mission Statement
  & Core Values

District Information
Staff Directory
General Contacts
Governing Board
News & Press Releases
Office Hours
Valley Air Newsletter
Ag Permits/Conservation
 Management Practices(CMP)

Ag Burning
Dairy Permitting
Smoke Management System
Weed Abatement Burning
File a Complaint
Smoking Vehicles
Wood Burning Status
Air Alerts
Air Quality Info
Daily Forecast
Exceptional Events
Real-Time Air Advisory
 Network (RAAN)

Web-based Archived Air Quality (WAAQ) System
Make a Payment
Small Business Assistance
Requests for Proposals (RFPs)
Abrasive Blasting
Certified Equipment
Compliance Assistance

Dust Control
Fireplaces, Stoves,
 and Heaters

Gasoline Dispensing (GDF)
Hazard Reduction Burning
Notice of Violation (NOV)
Policies/Guidance Documents
Prescribed Burning
Record Keeping Forms
Solvent Degreasing
Source Testing
State Portable Equipment
Title V Operating Permits
Training Schedule
Weed Abatement Burning
Calendar Contest
Activity Kit
Healthy Air Living Schools
Real-Time Air Advisory
 Network (RAAN)

Budget & Financial
Email Lists
Information & Documents
Request A Speaker
Public Records Requests
California Environmental
 Quality Act (CEQA)

Climate Change Action Plan
Demolition Permit Release
Guidelines for General Plans
Indirect Source Review
Emissions/Air Quality Models
Air Quality Mitigation
Air Quality Modeling
Air Toxics
Emission Factor
Emissions Inventory
Make Payments
Application Forms
Air Toxics
Ag Permits/Conservation
 Management Practices(CMP)

Best Available Control
 Technology (BACT)

Best Performance
 Standard (BPS)

Dairy Permitting
Drought Relief Actions
Emission Reduction

General Permitting Info
Oil and Gas Registration
Permit-Exempt Equipment
 Registration (PEER)

Portable Equipment
Public Notification
Small Business Assistance
Title V Operating Permits
Citizens Advisory Committee
Environmental Justice
  Advisory Group

Governing Board
Hearing Board
Special City Selection

Study Agency
Workshops & Hearings
Email Lists
Healthy Air Living
Public Notices
Public Records Release  Request
Receive Permit Notice
Workshops & Hearings
Current Rules
Recent Actions
Rules Main
Rules Under Development
File a Complaint
Healthy Air Living
Upcoming Events
Wood Burning


Abrasive blasting is defined as the cleaning or preparation of a surface by forcibly propelling a stream of abrasive material against a surface.  “Sandblasting” is also a term that describes this activity and for all purposes means the same as abrasive blasting.  Confined abrasive blasting is conducted within a permanent building while unconfined abrasive blasting is generally performed outdoors. 

Particulate emissions from abrasive blasting operations can be a significant source of air pollution.  To address this activity, the California Air Resources Board (ARB) adopted air pollution standards and requirements that apply to abrasive blasting operations, of which the District enforces.  These standards are found in Title 17 of the California Code of Regulations, sections 92000 through 92520.  The general provisions in §92500 require abrasive blasting activities to be conducted within a permanent building.  Only under special conditions may abrasive blasting be conducted outdoors.   

In addition to the Title 17 standards and requirements, it may be necessary for an owner or operator of abrasive blasting equipment to obtain a Permit to Operate from the District, per Rule 2010 – Permits Required.  The equipment may be exempt from this requirement if registered as portable equipment with the District per Rule 2280 – Portable Equipment Registration or with the state through the ARB Portable Equipment Registration Program.  Please contact the District's Small Business Assistance Program for more information on permitting and portable equipment registration requirements.


Visible Emissions

The visible emission standards described in §92400 apply to both confined and unconfined abrasive blasting.  Visible emissions created from confined abrasive blasting activities are limited to 20% opacity and unconfined abrasive blasting activities are limited to 40% opacity.  “Opacity” is a visual evaluation of the amount of one’s view that is obscured by a dust plume.  District inspectors are certified by the Air Resources Board to evaluate visible emissions using state and federal guidelines.

 [Back to Top]

Confined Abrasive Blasting

 Abrasive blasting is to be conducted inside a permanent building unless specific conditions allow for items to be blasted outdoors.  It may be required to install and operate a fabric or cartridge filter dust collector that provides a minimum of 99 percent control of the particulate matter emission caused by the blasting activities.  Visible emissions are limited to the 20% opacity standard.

[Back to Top]

Unconfined Abrasive Blasting

Unconfined abrasive blasting is essentially abrasive blasting conducted outdoors.  Visible emissions from permissible unconfined abrasive blasting are limited to the 40% opacity standard.  Additional requirements are in place when preparing surfaces for pavement markings and blasting stucco and concrete.

  • Unconfined abrasive blasting is permissible if the following conditions are met:
  • Steel or iron shot/grit is used exclusively; or,
  • The item to be blasted exceeds eight feet in any dimension or is situated at its permanent location.  Blasting is to be conducted by any of the following methods:
    • Wet abrasive blasting: using compressed air as the propelling force and water to minimize visible emissions.
    • Hydro blasting: using high-pressure liquid as the propelling force.
    • Vacuum blasting: a vacuum device immediately collects the spent abrasive, surface material, and dust.
    • Dry abrasive blasting using abrasives certified by the Air Resources Board

Additional conditions apply for blasting pavement markings, stucco, and concrete:

  • Pavement Marking: Pertaining to surface preparation for raised traffic delineating markers and pavement marking removal using abrasive blasting.  The performance standards are defined in §92510 and require:
    • Using wet abrasive blasting, hydro blasting, or vacuum blasting; or,
    • Dry abrasive blasting for removing or preparing the surface for immediate application of pavement markings of less than 1,000 square feet or for preparing the surface for raised traffic delineating markers using ARB Certified Abrasives.


  • Stucco and Concrete:  The performance standards are defined in §92520 and require:
    • Using wet abrasive blasting, hydro blasting, or vacuum blasting; or,
    • Dry abrasive blasting using ARB Certified Abrasives for…
      • Window and door returns and frames.
      • Eaves, overhangs, and ceilings.
      • Sweep abrasive blasting of concrete.  Sweep abrasive blasting is method of cleanup performed in order to achieve surface uniformity or impurity removal after wet blasting, hydro blasting, or vacuum blasting.  This performance standard does not apply to stucco surfaces.  
      • Completely shrouded structures and blast areas that effectively control emissions.  This requirement also applies to concrete swimming pools.
      • Abrasive cleaning operations.  This does not apply to aggregate exposure or paint removal related to new concrete construction or repair activity.

 [Back to Top]

ARB Certified Abrasives

 The Air Resources Board has certified dry abrasive products that comply with the performance standards set forth in §92530.  Using non-certified abrasives for unconfined dry abrasive blasting is prohibited.  Re-using or blending certified abrasives is generally not allowed unless demonstrated to the ARB that the abrasive materials conform to the specific performance standards. 


The ARB does maintain a list of certified abrasives and can be obtained by clicking this link: [ARB Certified Abrasives]. 


Manufacturers, producers, vendors and suppliers of certified abrasives are required to permanently label the invoice, bill of lading, and abrasive packaging or container with the following information:

  • The Manufacturer’s name or identification trade name;

  • A product description including the grade, weight proportion of components in abrasive blends, brand name of the abrasive or brand names and grades of components of abrasive blends; and,

  • The statement “ARB certified for permissible dry outdoor blasting”.

 [Back to Top]

Permits to Operate / Portable Equipment Registration

Prior to operating any abrasive blasting equipment, owners or operators are required to obtain a Permit to Operate issued by the District, per Rule 2010 – Permits Required, or a Portable Equipment Registration Certificate issued by the California Air Resources Board or the District.  For more information on permitting or registering portable equipment, please contact the District's Small Business Assistance Program at the District office nearest you. 

 [Back to Top]


For buildings and other permanent structures, Rule 4002 – National Emission Standards for Hazardous Air Pollutants requires an asbestos inspection be performed before undertaking a project that will result in disturbing the building materials, such as occurs from abrasive blasting.  More information may be obtained by contacting the District’s Compliance Division and by clicking this link: [Asbestos].

[Back to Top]


 Any abrasive blasting activity that generates emissions must not cause a nuisance, per Rule 4102 – Nuisance and §92210 of Title 17.  This requirement would apply to the potential release of toxic air contaminants caused by the abrasive blasting activities, such as that from lead coatings. Therefore, it is important to monitor the emissions and, if necessary, plan for and implement the appropriate control measures to limit the public’s exposure. 

 [Back to Top]

For More Information:

 Additional information may be obtained by contacting the District’s Compliance Division at the District office nearest you.

Title 17, California Code of Regulations – Abrasive Blasting


Article 1. General Provisions













Scope and Policy.


Article 2. Prohibitions






Visible Emission Standards.






Nuisance Prohibition.






Compliance with Performance Standards.


Article 3. Source Evaluation






Visible Emission Evaluation Techniques.


Article 4. Performance Standards






General Provisions.






Pavement Marking.






Stucco and Concrete.






Certified Abrasives.






Stucco and Concrete.

 [Back to Top]


 [Back to Top]